GateTrigger

The new Gate Trigger^TM is designed to increase the range of standard garage receivers. If you can see your gate, even from as much as a half-mile away, you can open or close it with this new wireless trigger, answering the need for gate control when distances from the gate to the home are greater than the range of a typical garage door opener. The device is compatible with ALL gate operators, and can provide a timed-out momentary dry relay closure. The Gate Trigger^TM is intended to complement, not replace the standard garage-type receiver.

The Trigger device is housed in a small 4.8" x 4.7" weather-proof enclosure and is pre- wired with a small 4-conductor cable for ease of hookup. The Trigger^TM operates as a companion product with any 22/38 dual-coded FRS/GMRS Motorola or other Base Station. A pair of them sit in the charger where they can be used to receive and send calls. They can be located in single or multiple places, such as the home, garage, or other peripheral buildings. Additional transceivers are availible and provide 2,178 different security codes.

A visitor could call ahead, on arrival the homeowner would then press "call" on one of his match coded Base Transceivers to open the gate. In another scenario the visitor would drive up to a homeowner's gate, notice the GateBell^TM on an arched post and push its button to wirelessly activate one of the matched-coded transcievers sitting in the home's Base Station. The person hearing the call, could then open the gate by using the transciever coded to the GateTrigger^TM unit, and send a "call" to open the gate. There are 830 code combinations useable with this system. Rural and suburban interference would be rare and easy for the owner to avoid.

This unique option is avalible for installers to use on any installation. Simple instructions are attached to the underside of the lid. It is desireable that the homeowner have a view of the area and monitor the gate's operation.